Block Paving Cleaning and Re-Sanding in Bristol
Professional block paving cleaning for driveways, paths and paved areas across Bristol and the surrounding areas. GPM Pressure removes built-up dirt, moss, algae, weeds and surface contamination before re-sanding the joints where required.
Professional Block Paving Restoration
Block paving can gradually become dark, slippery and overgrown as dirt, moss, algae and weeds build up across the surface and joints. Our professional cleaning process is designed to remove this contamination and restore the original appearance of the paving as far as its age and condition allow.
After cleaning and sufficient drying time, kiln-dried sand can be brushed back into suitable joints. This helps stabilise the blocks, refill areas where old jointing sand has been removed and leave the driveway with a cleaner, more complete finish.
Deep pressure cleaning
Removal of built-up dirt, moss, algae and loose weeds.
Controlled surface cleaning
Commercial equipment selected and adjusted for the paving condition.
Joint preparation
Loose debris and failed jointing material cleared during cleaning.
Re-sanding where suitable
Kiln-dried sand applied once the paving is sufficiently dry.
Every driveway is different. The age of the paving, level of staining and joint condition all influence the final result. We'll assess your driveway and recommend the most suitable cleaning and restoration process.
FAQs
How often should block paving be professionally cleaned?
1
This depends on the location, drainage, shade and surrounding vegetation. Many driveways benefit from professional cleaning every one to three years, with lighter maintenance between deeper cleans.
Does pressure washing damage block paving?
2
Incorrect pressure, unsuitable equipment or poor technique can damage surfaces and remove excessive jointing material. We assess the paving and use a controlled method appropriate to its condition.
Will cleaning remove all weeds?
3
Cleaning removes visible weeds, moss and loose growth, but roots and airborne seeds can return over time. Re-sanding and ongoing maintenance can help improve the finish, but no cleaning process can guarantee permanent weed prevention.
When can the driveway be re-sanded?
4
Kiln-dried sand should only be applied once the paving and joints are sufficiently dry. Depending on the weather, this may be completed later the same day or during a return visit.
Some specialist stains require additional treatment and complete removal cannot always be guaranteed. Send clear photos so we can assess the staining before quoting.
Yes. We provide block paving cleaning across Bristol, Cotswolds and selected surrounding areas. Send us your postcode to confirm availability.
Can you remove oil and rust stains?
5
Do you cover areas outside Bristol?
6
Ready to Restore Your Block Paving?
Send us your address, approximate measurements and a few photos or a short video. We will assess the condition of the paving and prepare a clear quote for cleaning, re-sanding and any suitable additional treatment.